Discussion: Failure of airbag Fiat stilo

Hi guys, on my stilo 1.6 16v, year 2001, I have an annoying problem regarding the failure of the airbag. Documenting the net I've discovered, and after some testing found that it is the sensor called OCS if I'm not mistaken place under the lining of the passenger seat. The options that I know of to fix this problem are two, or replace the sensor (expensive solution) or in the market there are emulators that put in the place of the sensor send a signal to the controller, "see" the weight of the passenger by eliminating the failure. My question is: ? can from the control unit to exclude that the sensor and reset the airbag system?

I have to say that I'm really a novice about but they are here to learn. What I need to be able to do this?

Thank you you were very clear. Not having a programmer ? can intervene via obd?

or put a resistance of 2.2 ohms on the wire of the sensor and should see you at the seat always occupied the unit, the only problem you will open? the passenger airbag in the event of an accident even if there is no one sat on it.

Sure you can insert a resistance of 2.2 ohms on the sensor of the presence hello.

Originally Written by glittering chiffon party dress.fitted

Sure you can insert a resistance of 2.2 ohms on the sensor of the presence hello.

Should be good for the 99%, otherwise if you want to go sure, you can measure the resistance on a seat working with a tester, maybe one of the other side, and we see that being accurate.

From tests carried out in the presence sensor passenger side can not be excluded with the resistance, from airbag control unit with a program dedicated to the exclusion ? possible, as well as the installation of an emulator available in the network from me already? tested with favorable outcome.